What’s Tumble Type Shot Blasting Machine
The tumble-type shot blasting machine is suitable for the surface derusting or shot blasting of large and medium batch production workpieces. The cleaning workpiece must be castings and heat-treated parts with a unit weight of less than 150kg that are not afraid of collision. This machine can be used as a stand-alone machine or Wiring use. It belongs to the scope of casting machinery. Automatic: Put the workpiece into the rubber crawler drum, the operator presses the "Run" button, the shot blasting chamber door is closed pneumatically, the shot blasting starts, the crawler moves forward, the workpiece continuously rolls, and the high-efficiency powerful shot blasting device will throw The pellets are projected on the surface of the tumbling workpiece at high speed, and the workpiece can be cleaned completely and evenly. The steel shot flows into the screw conveyor through the chute on the crawler belt, and then the steel shot is transported to the bucket elevator, and then lifted to the separator by the bucket elevator, where it is separated and stored for later use. After the shot blasting is finished, the door of the shot blasting chamber is automatically opened, the crawler is reversed, and the workpiece is unloaded. Application scope of crawler shot blasting machine: cleaning and finishing of die castings, precision castings, precision forgings, etc. Remove the surface oxide scale of heat-treated parts, castings, and forgings. Strengthening of the spring. Derusting and pretreatment of fasteners.