Page 4 of Steel Abrasives News

JX ABRASIVES Makes a Splash at FABTECH Exhibition, Attracts Significant Attention, Clients Express Distributorship Intent

At the recent FABTECH exhibition, the JX ABRASIVES booth garnered significant attention, showcasing products with remarkable effectiveness and drawing interest from various industries. Throughout the exhibition, visitors flocked to the booth, creating a vibrant atmosphere, with clients expressing high levels of interest and approval for JX ABRASIVES's products.   During the exhibition, several clients expressed their intention to become distributors for JX ABRASIVES. These clients exhibited...

JXQ324 Shot Blast Machines for our Poland Client

        The DXQ324 shot blasting machine is prepared to be shipped to one of our Poland customers.         Thanks for choosing us, and we will continue to provide high quality products at reasonable prices.          DXQ324 rubber tumblast shot blast machines are the ideal way to clean and finish batches of components such as castings and small fabrications. And it is No-Pit ,easy for installation and operation....

The main components of the shot blasting machine are indispensable

     Shot blasting machine is an important equipment that can not be missing in various manufacturing industries. It is used to polish the surface of steel, increase the hardness of steel and clean the surface rust. In order to be able to produce a certain degree of gloss in the steel products produced, it is necessary to use a shot blasting machine for processing. Although everyone is using shot blasting machines, it is not very clear about the components. Below, let me introduce...

welcome to EuroBLECH 2022 – 26th International Sheet Metal Working Technology Exhibition

Adjustment And Replacement Steps of Shot Blasting Machine Control Cage

       The control cage can make the projectiles that start to be accelerated in Impelier only fly out from the window of the control cage and are fixed on the shot blasting machine shell.     Adjustment of shot blasting machine control cage:     During use, due to the wear of the control cage, the diffusion angle of the projectile increases, resulting in accelerated wear of the shot blasting machine and other guards in the cleaning room. Therefore, when...

What Are The Reasons For The Peeling Of The Shot Blasting Machine After Shot Blasting?

    After shot peening, the surface of the casting will show a thin layer of skin that lifts up or even falls off. The phenomenon that the size, area and orientation are not fixed can be easily removed by hand. This phenomenon is called peeling after shot blasting. cause:     1. The casting is not compacted, and the surface has casting defects such as cold insulation, delamination, air bubbles and poor alloy blending.     2. The ejection speed of steel shot is too high....

Functional Characteristics Of Dust Removal Equipment

    The foam acts on the dust through good coverage, wetting, adhesion, etc., effectively reducing the dust concentration on the mining face, greatly improving the working environment of the mining face, improving the work efficiency of the underground operators, and effectively reducing the pneumoconiosis of the front-line workers. incidence of disease.     Compared with other wet dust suppression methods, foam dust suppression can reduce the water consumption by 50% to 80%,...

The Shot Blasting Machine Is Mainly Composed of 4 Parts

        ①The shot blasting machine generally uses a high-speed rotating impeller to project the projectile in a certain direction under the action of high centrifugal force. During the working process, some shot blasting machines can swing at a certain angle or move up and down.     ② projectile collection, separation and transportation system.     ③ The carrier that makes the casting run and turn over continuously during the cleaning process.  ...

Turntable Shot Blasting Machine

    The turntable shot blasting machine is suitable for cleaning the flat, thin-walled, sticky sand oxide scale and other attachments on the surface of the parts that are afraid of collision in casting, forging and heat treatment workshops. Shot blasting can not only remove the rust on the surface of the workpiece, but also clean up the rust and dirt on various workpieces to improve the surface quality of the workpiece; at the same time, it can improve the fatigue fracture resistance...